Visonicom V4G310M is a 2T2R 300Mbps WiFi portable 4G MiFi LTE router with battery. It supports both FDD and TDD duplex modes and multiple frequency bands: FDD B3 1800MHz DCS, FDD B7 2600MHz IMT-E, FDD B31 450MHz; TDD B42 3500MHz, and TDD B43 3700MHz.
With the built-in 4g module SIM card slot, simply put a standard 4G SIM/USIM card, the 4G/LTE mobile hotspot works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 300Mbps WiFi, which is also built inside.
Low-power Energy consumption enables the endurance up to 8~10 hours. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
Product | 4G LTE Mobile WiFi V4G310M | |
3G/LTE | ||
Duplex System | Support TD-LTE/LTE FDD | |
Protocol | TDD LTE | CAT4, up to 112Mbps DL and 17Mbps UL |
LTE FDD | CAT4, up to 150Mbps DL and 50Mbps UL | |
Frequency | TDD LTE | Band 42/43 |
FDD LTE | Band 3/7/31 (Can be customized) | |
Power | LTE | Power Class 3 |
Antenna | Antenna Connector | Internal Antenna |
WLAN AP | ||
Wi-Fi Protocol | Support IEEE 802.11 b/g/n | |
Protocol | IEEE 802.11n | Support |
IEEE 802.11g | Support | |
IEEE 802.11b | Support | |
Frequency | 2.4G | 1~13 channel |
Power | IEEE 802.11n | 11dBm |
RF Antenna | 2T2R | Internal, WiFi speed up to 300Mbps |
External Interface | ||
External Interface | SIM Card Slot | 1* Standard SIM card slot |
Power Interface | Micro USB 2.0 | |
USB Interface | Not Support | |
Buttons | Power Button | One |
Reset Button | One | |
Display | Panel LED Indicator | Signal, Battery, WiFi, Power |
LCD Touch Screen | TFT 1.44 Inch LCD(optional) | |
Battery | 3000mAh | |
Software | ||
Web UI | Standard Web UI (PC) | |
Network Setting | Support | |
Router Setting | Support NAT gateway | |
System Setting | Support | |
WiFi Setting | Support | |
Gateway | TCP/IP Protocol | Support |
UDP Protocol | Support | |
IPv4 | Support | |
IPv6 | Support | |
SNTP | Support | |
DHCP | Support | |
Static IP Address Assignment | Support | |
NAT | Support | |
IP Firewall | Support | |
SoftAP IPv6 | Support | |
MAC Filter | Support | |
IP Filter | Support | |
URL Filter | Support | |
WAN port flow statistics | Support | |
WLAN | 802.11b | Support |
802.11g | Support | |
802.11n | Support | |
Power adjustment | Support | |
Auto channel select | Support | |
SSID broadcast | Support | |
Security/ Encryption | WEP/WPA/WPA2 PSK | |
MAC address filtering | Selectable Support | |
Security | PIN code lock | Support |
Modify PIN code | Support | |
Administrator password modify | Support | |
System Upgrade | Local firmware upgrade | Support (Web UI/PC remote upgrade) |
OS Support | Win XP/Vista/7/8/10, Mac OS X10.6 and above version | |
Physical & Environmental | Dimensions | 123.8mm*58.6mm*14.9mm |
Weight | 88g | |
Operating Temperature | 0~40℃ | |
Storage Temperature | -10~45℃ | |
Package | MiFi Device | 1 |
Li-pol Battery | 1 | |
Data Cable | 1 | |
Quick Guide | 1 |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G953M/V4G953ML is a WiFi LTE MiFi router 4G portable router modem manufactured with built-in 4G LTE module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G wireless MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the travel wireless 4G MiFi router LTE WiFi router modem V4G953M/V4G953ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile WiFi 4G router LTE wireless travel router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G953M/V4G953ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G952M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G952ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G311D LTE CPE wireless 4G desktop router, is manufactured for fast, stable, and convenient internet service for home and office. The 2T2R 300Mbps 4G WiFi CPE supports both LTE duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B3 1800MHz DCS,
FDD B5 850MHz CLR,
FDD B7 2600MHz IMT-E,
FDD B12 700MHz Lower SMH blocks A/B/C ,
FDD B17 700MHz Lower SMH blocks B/C ,
FDD B20 800MHz EU Digital Dividend,
FDD B28 AB 700MHz,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
The WiFi 4G CPE LTE desktop router also backward supports HSPA+/HSUPA/HSDPA/WCDMA, CDMA EVDO Rev B/Rev A/CDMA, EDGE/GPRS/GSM.
With the built-in 4G module SIM card slot, simply insert a standard 4G SIM/USIM card, the 4G/LTE CPE Wireless router works with the downlink speed up to 150Mbps and uplink 50Mbps for fast 4G internet access sharing with 30 users (recommended, max 254 users theoretically) with 300Mbps WiFi transfer.
Besides FDD/TDD LTE 4G internet, the 4G WiFi CPE also allows multiple internet access such as PPPoE, DHCP client, Static IP, PPTP and L2TP.
The detachable high-gain 5dBi antennas enhance stable and fast WiFi connection.
This LTE wireless CPE can be served with or without internal battery.
Main Features
* TDD-LTE: Supports TDD BAND38/39/40/41
* LTE FDD: Supports FDD BAND1/3/5/7/8/20, B12/17, B28 AB
* TD-SCDMA: Supports TD-SCDMA BAND34/39
* WCDMA: Supports WCDMA BAND1/2/5/8
* GSM: Supports GSM 850,EGSM,DCS,PCS
* WiFi: Supports IEEE802.11b/g/n , band 2.4G
* LAN: SupportsRJ45 x 4(10/100Mbps Ethernet)
V4G311D LTE Router Product Specifications:
Product | LTE CPE/4G LTE Wireless Desktop Router 300Mbps |
Model | V4G311D |
FDD LTE Support | B1(2100),B3(1800),B5(850),B7(2600),B8(900),B20(800),B12/17(700),B28A/B(700) |
TDD LTE Support | B38(2600), B39(1900), B40(2300), B41(2500) |
TD-SCDMA Support | B34(2100)/B39(1900) |
UMTS (WCDMA) | B1(2100)/B2(1900)/B5(850)/B8(900) |
GSM Support | Quad Band (850/900/1800/1900) |
Speed FDD-LTE | Cat4 150 Mbps DL/50Mbps UL |
Speed TDD-LTE | Cat4 150 Mbps DL/50Mbps UL |
Speed UMTS | R99 384 kbps DL/UL |
R5 HSDPA 7.2 Mbps DL | |
R6 HSUPA 5.76 Mbps UL | |
R7 HSPA+ 21 Mbps DL/5.76 Mbps UL | |
Speed TD-SCDMA | R5 1.28 TDD-HSDPA 2.8 Mbps DL |
R7 1.28 TDD-HSUPA 2.2 Mbps UL | |
R8 1.28 TDD-HSPA+ 4.2 Mbps DL/2.2 Mbps UL | |
GSM/GPRS/EDGE | DTM (simple class A), multislot class 12 |
WLAN Feature | Protocol:802.11 b/g/n |
Speed:300Mbps | |
Antenna: Detachable antenna | |
Frequency: 2.4GHz | |
Security | Open,Share,WEP,WPA/WPA2,WPA-PSK,WPA2-PSK,WPA-PSK/WPA2-PSK,802.1x |
WPS | |
Built-in firewall | |
IP and MAC address binding against ARP attacks | |
IP address filtering | |
MAC address filtering | |
Functions | SMS |
Auto-APN | |
SSID | |
WDS | |
PIN/PUK code support | |
DDNS | |
Qos | |
WAN Connection,support DHCP client,static IP, | |
External Interface | Four 10/100Mbps Ethernet RJ-45 LAN ports |
USB Type A*1 for USB drive | |
Micro USB*1 for DC input 5v/1.5A | |
USIM slot | |
DC-Jack 5V/2A | |
LED Indicator | Power, WiFi, WPS, LAN*4,Network( LTE/3G Signal) |
USIM&SIM | Standard 8PIN port |
Button | Power On/Off, WPS, Reset |
4G/3G Antenna | Internal MIMO Antenna |
WiFi Antenna | Internal Antenna or External Antenna Detachable |
Battery | Removable Li-ion battery,3000mAh(optional accessory with extra cost) |
Peak Power | TD-LTE: DL/UL 150/50 Mbps (Category 4) |
Rx Diversity | Support |
Equalization | Support |
Authentication | Support IP and PPP TYPE; Support PAP/CHAP authentication. |
Temperature | -10℃ ~ 40℃ for storage; -40℃ ~70℃ for working |
Humidity | Working: 90-95%; Storage: 10-95% |
Package Box | Generic or OEM |
Package Contents | CPE; DC Adapter; QIG; Battery(optional) |
Size | 162*157*52mm |
Weight | 220g/270g (without/with internal battery 3000mAh) |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G958M/V4G958ML is a LTE WiFi router 4G wireless router modem manufactured with built-in 4G LTE module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard LTE 4G SIM/USIM card, the mobile LTE wireless router 4G MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the portable WiFi 4G MiFi router LTE Wireless router modem V4G958M/V4G958ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 15+ hours
The travel WiFi 4G router LTE wireless portable router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G958M/V4G958ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G958M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G958ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 6800mAh battery for 15+ hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G952M/V4G952ML is a WiFi LTE mobile router 4G wireless router modem manufactured with built-in 4G LTE module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G wireless MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the travel wireless 4G MiFi router LTE WiFi router modem V4G952M/V4G952ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile WiFi 4G router LTE wireless travel router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G952M/V4G952ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G952M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G952ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G951M/V4G951ML is a wireless LTE travel router 4G MiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G mobile WiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the mobile wireless 4G MiFi router LTE MiFi router modem V4G951M/V4G951ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The portable WiFi 4G modem router LTE wireless travel router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G951M/V4G951ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G951M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G951ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G858M/V4G858ML is a wireless LTE router MiFi 4G WiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the travel LTE WiFi router 4G MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the portable wireless 4G MiFi router LTE WiFi router modem V4G858M/V4G858ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile WiFi 4G modem router LTE wireless MiFi router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G858M/V4G858ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G858M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G858ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G653M/V4G653ML is a wireless 4G router MiFi LTE WiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the travel 4G MiFi wireless LTE router modem V4G653M/V4G653ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile LTE modem router 4G wireless MiFi router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G653M/V4G653ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G653M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G653ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G555M/V4G555ML is a 4G router WiFi LTE MiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G/LTE SIM/USIM card, the travel 4G WiFi router LTE MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the portable 4G MiFi wireless SIM router LTE V4G555M/V4G555ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile 4G modem router LTE MiFi router wireless 4G supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G555M/V4G555ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G555M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G555ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G554M/V4G554ML is a WiFi 4G router MiFi LTE modem router manufactured with built-in 4G LTE module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable WiFi 4G LTE router works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the mobile 4G MiFi wireless SIM router LTE V4G554M/V4G554ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The LTE modem router LTE MiFi router wireless 4G supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G554M/V4G554ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G554M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G554ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.